בי אם אס BMS 88v 24s – בקר טעינה / פריקה – לסוללת ליתיום 30A / Li-ion / Lipo

בי אם אס BMS 88v 24s – בקר טעינה / פריקה – לסוללת ליתיום 30A / Li-ion / Lipo

830 

קיים במלאי

בקר BMS איכותי (חזק במיוחד) לסוללת ליתיום בעלת תאי li-ion או lipo, המותאם במיוחד לאיזון תאי הליתיום. בקר סוללה BMS (בי אם אס Battery management System) זה מיועד לסוללה בעלת 24 תאים בטור, במתח נומינאלי של 88V, מתח טעינה 100.8V, הבקר יגביל את זרם הפריקה המקסימאלי ל 30A עם זרם רגעי (פיק) של 60A. מיועד לסוללות לאופניים חשמליים מערכות חזקות, לאופנוע חשמלי, רכב חשמלי, למערכות גיבוי אל פסק, ומערכות סולאריות, לתאורה, ולכל מערכת שהמתח הנומינאלי שלה הוא 88V.  לבקר הסוללה BMS הגנת זרם, הגבלת זרם הטעינה, ניתוק טעינה במצב מלא, איזון טעינה, וחיישן הגנה מהתחממות.

קיים במלאי

תיאור

בקר סוללה BMS (בי אם אס Battery management System) אחראי על איזון הטעינה לסוללת ליתיום ושמירה על חיי הסוללה. חשוב שבקר הסוללה שמותקן יהיה איכותי ותואם לנתוני תאי הסוללה, כך סוללת הליתיום תאריך ימים ותספק את מלוא הכוח והקיבולת האפשריים.

בקרי הסוללה BMS  (PCM)  מיובאים על ידי ,'עולם חדש' ממפעל איכותי שמייצר את הבקרים על פי דרישה מיוחדת שלנו, בתאימות מוחלטת לנתוני תאי הסמסונג, ומתאים גם לשאר תאי ה li-ion 3.7v-4.2v. בקר הסוללה BMS מותאם למתחי הטעינה של כל סוגי תאי ה li-ion / lipo הקיימים. כל בקר BMS עובר בקרת איכות ובדיקת תקינות בטרם יוצא מהמפעל, על כל בקר מודבקת מדבקת בדיקת איכות QC. (Quality Check)
על הבקרים מורכב גוף קירור אלומיניום מיוחד, האחראי על פיזור החום ושמירת טמפרטורה נכונה.

(הוראות חיבור / תרשים חיבורים לבקר סוללה BMS בהמשך הדף )

BMS_30A_specifications

1. Features:
1.Applicable to 24 Cell li-ion battery packs.
2.The 24S series are suitable for protection of 24 Cell li-ion battery packs from over-charge,over-discharge,balance,over-current and load short-circuiting .
3. Power equilibrium function are suitable for every cell.
2. Electrical characteristics : Test conditions : room temperature to25 ℃; Excess discharge-current & B- to P- resistance to dynamic parameter test, single cell voltage required≥ 3.7V

Item Symbol Explain Parameter
VDET1 Single-cell Over-charge detection voltage 4.25V±0.035V
Over-charge tVDET1 Over-charge detection delay time 1.6S(MAX)
VREL1 Single-cell Over-charge release voltage 4.1V±0.1V
VBU Single-cell balance detection voltage 4.175V±0.035V
Balance VBL Single-cell balance release voltage 4.175V±0.035V
IB Single-cell balance current(4.22V) 43mA±9mA
VDET2 Singe-cell Over-discharge detection voltage 2.8V±0.1V
Over-discharge tVDET2 Over-discharge detection delay time 1.6S(MAX)
VREL2 Over-discharge release voltage 2.8V-3.2V
IDP Excess discharge-current detection current(300A Electrical Load) MIN:65A ,MAX:140A
Excess discharge-current tVDET3 Excess discharge-current detection delay time 3s(MAX)
Excess discharge-current release condition Move load
Detection condition External short circuit
Short Circuit TSHORT detection delay time 2ms(MAX)
Release condition Move short circuit loop
Internal resistance RDS Battery packs B- to Load P- on-resistance B- to P- RDS≤20mΩ
Static current IDD Single-cell current consumption in normal operation
(single-cell Voltage=3.9V) ≤50μA
Charge MOSFET Withstand Voltage VDS Withstand charger Voltage DC 55V
Rated operational current Withstand Load current 30A,MAX:60A≤200ms
Charge current Withstand charge current ≤30A

Rated current MOSFET thermal characteristics
Discharge rated current MOSFET thermal characteristics 50ºC±8ºC
3. Cable connect note:

Main cable:
1. B-:Battery packs cathode (3135 black 12AWG*L: 200±8mm)
2. P-:Load cathode & charger cathode (3135 blue 12AWG*L:200±8mm)
Signal cable:
Production 11Pin signal cable form right 1st black cable start to left 8th red cable over:
B-(GND)/B1/B2/B3/B4/B5/B6/B7/B8/B9/B10(B+)
B-:black B1-B10:red
UL1007 24AWG L=300±8mm
Note:
Please first connect B- to battery pack cathode and connect signal cable,Then connect charger cathode;Move order reverse,Note cable connect order,Connect error would mangle
part capability.
4. Application block diagram

BMS_Wiring_Diagram_neworld

מידע נוסף

מתח נומינאלי

מתח טעינה

זרם מירבי

זרם פריקה מתמשך

זרם פריקה 'פיק'

הספק ממוצע

גרף טעינה

,

טמפרטורת עבודה

משקל

צבע

, ,

מצב

מארז / מעטפת

אטימות למים

יצרן

אחריות

חוות דעת

There are no reviews yet

היה הראשון לכתוב סקירה “בי אם אס BMS 88v 24s – בקר טעינה / פריקה – לסוללת ליתיום 30A / Li-ion / Lipo”

האימייל לא יוצג באתר. שדות החובה מסומנים *

רוצה להגיב או לשאול לגבי המוצר?


 

כותרת

עבור למעלה